Specifying Memory Channels - Yaesu FTM-100DR Operating Manual

Searching for signals

Specifying memory channels

Specific memory channels to be scanned may be selected using the Setup menu "2
MEMORY SCAN TYPE" set to "2 SELECT MEMORY".
1
Press and hold
The MEMORY WRITE screen appears.
2
Press
3
Rotate the DIAL to select the desired memory
channel.
4
Press twice, (
side).
On the right side of the memory channel number
display, "►" lights up. This indicates the "SELECT"
state. The memory channels marked with this
indicator are scanned when scanning only specified
channels.
Tips • To unselect the memory channel, press the button again. "►" turns off.
• To specify other memory channels, repeat steps 3 to 4.
5
Press .
The previous screen returns and "►" is displayed on the left side of the memory
channel number.
66
for over one second.
, ( appears on the left side).
appears on the upper