Recalling The Preset Setting (3 Recall Preset); Deleting The Registered Data From The Memory Channels (4 Memory Ch Reset) - Yaesu FTM-100DR Operating Manual

Setup menu operations: 13 RST/CLONE
5
Press and hold
Returns the display to the previous operating screen.

Recalling the preset setting (3 RECALL PRESET)

You can recall the preset setting from the Setup menu.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [13 RST/CLONE], then
press .
3
Rotate the DIAL to select [3 RECALL PRESET],
then press
The confirmation screen appears.
4
Rotate the DIAL to select [OK?], and then press
.
Recalls the preset setting and returns the display to
the previously viewed screen.
To cancel the Setup menu without any change, select
[Cancel], then press
5
Press and hold
Returns the display to the previously viewed screen.
Deleting the registered data from the memory channels
(4 MEMORY CH RESET)
Deletes the registered data from the memory channels.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [13 RST/CLONE], then
press .
The menu list appears.
3
Rotate the DIAL to select [4 MEMORY CH
RESET], then press
4
Rotate the DIAL to select [OK?], and then press
.
Tip To cancel resetting, select [Cancel].
Deletes the registered data from the memory channels and returns the screen to the
previously viewed screen.
148
for over one second.
for over one second.
.
.
for over one second.
for over one second.
.