Toggling The Operating Band; Adjusting The Volume Level - Yaesu FTM-100DR Operating Manual

144/430mhz dual band transceiver
Hide thumbs Also See for FTM-100DR:
Table of Contents

Advertisement

2
Press
.
The display changes.
The entered call sign appears at the bottom of the
screen, and the screen switches to the frequency
display screen.

Toggling the operating band

Normally, 2 operating bands appear on the top half and bottom half of the screen. The
frequency and modulation mode may be changed only for the band on the top half of
the screen, which is called "operating band". The other band, displayed on the bottom
half of the screen, is not in operation, and is called the "sub-band".
1
Press
.
Each press toggles the operating band between
A-band and B-band.
Caution
The operating band signals and sub-band signals
cannot be received simultaneously.

Adjusting the volume level

1
Rotate VOL.
Clockwise rotation increases the volume, whereas
counterclockwise rotation decreases the volume.
Receiving
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents