Checking The Route Using A Personal Computer - Yaesu FTM-100DR Operating Manual

144/430mhz dual band transceiver
Hide thumbs Also See for FTM-100DR:
Table of Contents

Advertisement

4
Rotate the DIAL to select [1 ON [xx sec]], then press
.
Tip
The default setting: 2 OFF
5
Rotate the DIAL to select the interval for saving the location information.
"1 sec", "2 sec", "5 sec", "10 sec", "30 sec", "60 sec"
Tip
The default setting: 10 sec
6
Press and hold
Sets the interval for saving the location information and returns the display to the
previously viewed screen. The
Starts saving the location information at the set interval.
Tips
• The location information is periodically saved until the power to the transceiver is switched OFF or
when "OFF" is selected in step 4.
Saving of location information resumes under the same file name when the transceiver is turned
OFF and then ON again within the same day, or when the saving interval is selected again in step 5.
• The data is saved under the filename "GPSyymmdd.log".
The portion "yymmdd" indicates the saving start time in "yy" (year), "mm" (month), and "dd" (day).

Checking the route using a personal computer

The route can also be displayed on a computer with commercially available mapping
software using the log data of the saved location information.
1
Turn off the transceiver.
2
Remove the microSD card.
Tip
Refer to "Removing the microSD memory card" on page 32.
3
Insert the microSD memory card into the personal computer using an appropriate
memory card reader.
4
Open the "FTM100D" folder located on the microSD memory card.
5
Open the "GPSLOG" folder.
The data is saved under the filename "GPSyymmdd.log".
The portion "yymmdd" indicates the saving start time in "yy" (year), "mm" (month),
and "dd" (day).
6
Import the data into the mapping software.
The route will be displayed on the map.
Tips
• Refer to the operating manual of the mapping software for instructions on how to import and display
the route data on the map.
• The location information can also be used by connecting the transceiver directly to a computer. See
"Connecting an external device" on page 108.
for over one second.
icon lights up on the screen.
Activating the GPS function
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents