New Two Ctcss Tone Pager Function; Using The Pager Function; Setting The Code For Your Station - Yaesu FT-70DR Advance Manual

New Two CTCSS Tone Pager Function

When using the FT-70DR/DE transceivers with a group of friends, setting the two
CTCSS tone personal codes allows calling just the specific stations. Even when the per-
son who is called is not near the transceiver, the information on the LCD indicates that a
call was received.
The new two CTCSS tone pager feature does not operate in the digital mode. Press the [ MODE ]
key to change to the Analog FM mode or press and hold the [ AMS ] key to turn the AMS
function ON.

Using the Pager Function

1. Press the [ F ] key, then press the [ 5 ] (SQ TYP) key.
2. Rotate the DIAL knob to select the "PAGER".
3. Press the PTT switch to save the setting and return to
normal operation.
The new pager function is activated.

Setting the Code for Your Station

Set the "pager code" to be called by other stations.
1. Press and hold the [ F ] key, then rotate the DIAL knob
to select the Set Mode [ 38 PAG.CDR ] .
2. Press the [ F ] key.
3. Rotate the DIAL knob to select the first element of the
code from 01 to 50.
4. Press the [ BAND ] key to move the icon to the second
element of the code.
5. Rotate the DIAL knob to select the second element of
the code from the 01 to 50.
The first and second element of the code may not be
set to the same code.
6. Press the PTT switch to save the setting and return to
normal operation.
z The reverse combination works as the same code, that is "05 47" is the same as "47 05".
z If the same code is specified for all individuals, all the individuals can be called at the same
time.
z The default code is "05 47".
z When receiving the signals, the intermittent sound of the tone signal may be heard slightly.
10
FT-70DR/DE Advance Manual
New Pager icon