Yaesu FTM-100DR Operating Manual page 112

Connecting an external device
• Data cable "CT-163" (optional)
➀ PKD (packet data input)
➁ GND
➂ PSK (PTT)
➃ RX 9600 (9,600 bps packet data output)
➄ RX 1200 (1,200 bps packet data output)
➅ PK SQL (squelch control)
➆ TXD (serial data output [transceiver → PC])
➇ RXD (serial data input [transceiver ← PC])
➈ CTS (data communication control)
➉ RTS (data communication control)
Tips
• Make sure to turn off the transceiver before connecting cables.
• For details on connecting to a TNC or computer, see the instruction manual supplied with the TNC.
• The computer may cause interference with reception.
When signals cannot be received normally, move the computer away from the transceiver and use
a photo-coupler and noise filter to connect.
● Setting the packet communication operation
1
Turn on the transceiver.
2
Press and hold
The Setup menu appears.
3
Rotate the DIAL to select [9 DATA], then press
The menu list appears.
112
To the
transceiver
for over one second.
To the computer, etc.
To the TCN, etc.
Dsub 9 pin
➀ –
➁ TXD (serial data output [transceiver → PC])
➂ RXD (serial data input [transceiver ← PC])
➃ –
➄ GND
➅ –
➆ CTS (data communication control)
➇ RTS (data communication control)
➈ –
DIN 6 pin
➀ PKD (packet data input)
➁ GND
➂ PSK (PTT)
➃ RX 9600 (9,600 bps packet data output)
➄ RX 1200 (1,200 bps packet data output)
➅ PK SQL (squelch control)
.