Split Memory - Yaesu FTM-100DR Operating Manual

Split memory

A separate transmit frequency may be registered to a memory channel to which a
receive frequency has already been registered.
1
In VFO mode, select the transmit frequency to be registered.
2
Press and hold
The MEMORY WRITE screen appears.
The entered transmit frequency automatically
appears on the next blank memory channel.
3
Rotate the DIAL (if necessary) to select the memory
channel to which the transmit frequency is to be
registered.
Tip Pressing
of 100 memory channels.
4
Press , (
The confirmation screen appears.
5
Rotate the DIAL to select [OK?], then press
Registers the transmission frequency, then displays
the memory mode screen.
Tip appears on the left side of a memory channel when
a separate transmit frequency is registered. Also, when
such a memory channel is selected,
screen.
for over one second.
briefly skips memory channels in steps
appears on the upper side).
appears on the
Using the Memory
.
59