Page 1
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 FTM-100DR Operating Manual 144/430MHz DUAL BAND TRANSCEIVER C4FM FDMA Before Using Installation and Connection Basic Operations Using the Memory Scanning Using the GPS Function Using the APRS Function Using the GM Function...
*Refer to the separate “GM Operating Manual” Supports Yaesu WIRES-X Internet linking, providing communication with remote partners using the Internet *Refer to the separate “WIRES-X Operating Manual”...
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Introduction Important precautions for mobile radio operation The use of protective tape or covering is recommended to protect the wiring and the power cord inside the vehicle. When installing the unit inside a vehicle, locate the radio, antenna, co-axial cable, etc.
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Introduction How to read this manual In this manual, controller operations are expressed as follows: Press ..........Indicates that the key or switch is to be pressed quickly. Press for 1 second or longer ..Indicates that the key or switch is to be pressed for one second or longer.
Application for FCC / IC Before Using FCC ID: K6620485X40 IC: 511B-20485X40 Safety Precautions (make sure to read these) Make sure to read this manual in order to use this radio safely and correctly. Note beforehand that the company shall not be liable for any damages suffered by the customer or third parties in using this product, or for any failures and faults that occur during the use or misuse of this product, unless otherwise provided for under the law.
Page 6
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Safety Precautions (make sure to read these) Do not touch any liquid leaking from Do not operate the device when the liquid display with your bare flammable gas is generated. Doing so may result in fire and hands. explosion. There is a risk of chemical burns occurring when the liquid comes Do not transmit in crowded places into contact with the skin or gets into...
Page 7
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Safety Precautions (make sure to read these) Do not use the device when the Refrain from using headphones and power cord and connection cables earphones at a loud volume. Continuous exposure to loud volumes are damaged, and when the DC may result in hearing impairment.
Page 8
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Safety Precautions (make sure to read these) Keep out of the reach of small Do not place the device on an children. unsteady or sloping surface, or in If not, this may result in injuries to a location where there is a lot of children.
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Name and Function of Each Component Controller Front ➀ Power/Lock Switch ( Pressing for over 2 seconds switches the power between ON and OFF. Briefly pressing engages or releases the key lock while the radio is turned on.
Page 10
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Name and Function of Each Component ➈ V/M MW key ( Briefly pressing each time switches between VFO mode and memory mode. Pressing and holding for over 1 second displays the memory registration screen. ➉...
Page 11
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Name and Function of Each Component Main body Front ➀ CONTROL jack Plug in the control cable into this jack to connect with the controller. ➁ MIC jack Plug in the provided microphone cable.
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Name and Function of Each Component Microphone (MH-48A6JA) Frequency is increased by 1 step. [UP] [DWN] Frequency is decreased by 1 step. Locks / unlocks the [UP] and [DWN] keys and [LOCK] [P1] to [P4] keys.
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Name and Function of Each Component Explanation of the screen ➀ Icon display Displays the Bluetooth, APRS, microSD card and GPS icons when each function is in use.
Application for FCC / IC Installation and Connection FCC ID: K6620485X40 IC: 511B-20485X40 Installing the Radio Precautions during installation Note the following when installing this radio. Do not install the radio in a place where there is extreme vibration, where there is a lot of dust, excessive humidity or high temperature, or where it is exposed to direct sunlight.
Page 15
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Installing the Radio Bumper type Trunk type ● Antenna installation in a fixed station There are omni-directional, and directed array antennas for use in an outdoor setting. • Omni-directional antennas such as the GP (Ground Plane) antenna are suitable for communications between a local station and mobile stations in all direction.
Application for FCC / IC FCC ID: K6620485X40 IC: 511B-20485X40 Installing the Radio Installing the main body Install the main body using the provided MMB-36 bracket. Select the installation location Select a location where the antenna coax and power cable can be securely attached. Caution Also refer to “Installation location when used in a mobile unit”...