Using The Dtmf Function; Registering The Dtmf Code - Yaesu FTM-100DR Operating Manual

Using the DTMF function

DTMF tones (Dual Tone Multi Frequencies) are the tones you hear when dialing from a
telephone keypad. The FTM-100DR transceiver can transmit the DTMF codes by using
the keys on the microphone or recalling registered numbers from memories.
The maximum of 16-digit DTMF codes can be registered in up to 9 memory channels.
It is convenient to register telephone patch numbers, and network linking sequences to
the DTMF memory channels.
Tip
Transmits the DTMF code consisting of frequencies shown as follows.
1209Hz
697Hz 1
770Hz 4
852Hz 7
941Hz
✽

Registering the DTMF code

1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [4 SIGNALING], then press
.
The menu list appears.
3
Rotate the DIAL to select [5 DTMF MEMORY], then
press
.
The DTMF memory screen appears.
4
Rotate the DIAL to select the desired memory
channel to register the DTMF code, and then press
.
The cursor jumps to the left end of [ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ❘ ]
displayed on the right.
5
Rotate the DIAL to select the desired DTMF code,
then press (
Tip You can also use the keypad on the microphone to input
the DTMF code.
6
Repeat step 5.
Tips • To move the cursor to the left, press
appears on the upper side).
• To delete the number you have just entered and move
the cursor to the left, press
the upper side).
7
Press
.
Sets the DTMF code.
Tip To register DTMF codes to other channels, repeat steps 4 to 6.
1336Hz 1477Hz 1633Hz
2 3
5 6
8 9
0 #
for over one second.
appears on the upper side).
(
A
B
C
D
(
appears on
91