Functions To Use As Necessary; Copying The Radio Data To Another Transceiver; Using A Microsd Memory Card; Copying Data To A Microsd Memory Card - Yaesu FTM-100DR Operating Manual

Copying the radio data to another transceiver

The memory channels and settings in the set-up menu can be copied to another FTM-
100DR transceiver. This is convenient, for example, to configure the transceiver to
match to the settings of stations that you communicate with frequently.

Using a microSD memory card

The data files saved in the FTM-100DR can be selected and copied to a microSD
memory card which may then be used to transfer the data to other FTM-100DR
transceivers.

Copying data to a microSD memory card

1
Insert a microSD memory card into the transceiver.
Tip See "Inserting a microSD memory card" on page 32.
2
Press and hold
The Setup menu appears.
3
Rotate the DIAL to select [11 SD], then press
The menu list appears.
4
Rotate the DIAL to select [1 BACKUP], then press
.
Displays the screen where you can select the copy
direction.
5
Rotate the DIAL to select [1 Write to SD], then press
.
The screen is displayed where the type of data to be
transferred is selected.
"1 ALL": Copies all data in the transceiver.
"2 MEMORY": Copies only information registered to the memory channels.
"3 SETUP": Copies only settings in the Setup menu.
6
Rotate the DIAL to select the data to be copied, and
then press
The confirmation screen appears.
104

Functions to Use as Necessary

for over one second.
.
.