Yaesu FTM-100DR Operating Manual page 57

5
Rotate the DIAL to select [Y], then press
( appears on the upper side).
"Y" is entered, and the cursor moves to the right.
Tip To delete the letter, press
upper side).
6
Rotate the DIAL to select [M], then press
( appears on the upper side).
"M" is entered, and the cursor moves to the right.
Tips • To move the cursor to the left, press
appears on the upper side).
• To delete the letter you have just entered and move the
cursor to the left, press
upper side).
7
Press twice (
side).
The symbols input screen appears.
8
Rotate the DIAL to select "space", then press
( appears on the upper side).
A space is entered, and the cursor moves to the
right.
9
Press (
Upper case letters can be entered.
10
Rotate the DIAL to select [G], then press
([ ] appears on the upper side).
"G" is entered, and the cursor moves to the right.
11
Press 3 times (
Lower case letters can be entered.
12
Rotate the DIAL to select [r], then press
"r" is entered, and the cursor moves to the right.
13
Rotate the DIAL to select [p], then press
"p" is entered, and the cursor moves to the right.
14
Press 4 times (
The numbers input screen appears.
15
Rotate the DIAL to select [0], then press
"0" is entered, then the cursor moves to the right.
16
Rotate the DIAL to select [1].
"1" is entered.
(
( appears on the
appears on the upper
appears on the upper side).
appears on the upper side).
appears on the upper side).
appears on the
(
([ ] appears on the upper side).
([ ] appears on the upper side).
([ ] appears on the upper side).
Using the Memory
57