Switching The Modulation Mode - Yaesu FTM-100DR Operating Manual

Receiving

Switching the modulation mode

In analog mode, the modulation mode can be selected from "AUTO", "MANUAL (FM)"
and "MANUAL (AM)".
When shipped from the factory, the mode is set to "AUTO" where the most optimal
modulation mode is automatically selected according to the frequency.
1
Select the desired operating band.
2
Press and hold
The Setup menu appears.
3
Rotate the DIAL to select [2 TX/RX], then press
.
The menu list appears.
4
Rotate the DIAL to select [1 ANALOG MODE
SELECT], then press
The modulation mode setting value appears.
5
Rotate the DIAL to select the desired modulation
mode.
"1 AUTO": Automatically switches the modulation
mode to match the frequency band.
"2 MANUAL(FM)": Switches to FM mode.
"3 MANUAL(AM)": Switches to AM mode.
Tip The default setting: AUTO
6
Press and hold
Sets the selected modulation mode and returns the display to the previously viewed
screen.
Tip
You can also return to the previous screen by pressing
40
for over one second.
.
for over one second.
3 times.