Specifications - Yaesu FTM-100DR Operating Manual

Specifications

● General
Frequency range
Channel steps
Emission Type
Frequency stability
Antenna impedance
Supply Voltage
Current consumption
Operating temperature
Case size
Weight (approx.)
● Transmitter
RF power output
Modulation type
Spurious emission
Microphone impedance
DATA terminal input impedance : About 10 kΩ
: TX 144 - 146 MHz or 144 - 148 MHz
430 - 440 MHz or 430 - 450 MHz
: RX 108 - 137 MHz (Air Band)
137 - 174 MHz (144 MHz HAM)
174 - 400 MHz (GEN1)
400 - 480 MHz (430 MHz HAM)
480 - 999.99 MHz (GEN2) Cellular Blocked (USA only)
: 5/6.25/8.33/10/12.5/15/20/25/50/100 kHz
(8.33 kHz : only for Air band)
: F1D, F2D, F3E, F7W
: ±2.5 ppm −4°F to +140°F (−20°C to +60°C)
: 50 Ω
: Norminal 13.8 V DC, negative ground
Operating 11.7 - 15.8 V DC, negative ground
: 0.5 A (receive)
11 A (50 W TX, 144 MHz)
12 A (50 W TX, 430 MHz)
: −4°F to +140°F (−20°C to +60°C)
: Radio unit: 5.5" (W) × 1.8" (H) × 6.5" (D) (140 × 45 × 164 mm) with Front
panel, w/o Fan, knob & connectors
Front panel: 5.5" (W) × 1.8" (H) × 1.2" (D) (140 × 45 × 29 mm) w/o knob
: 2.43 lbs (1.1 kg) with radio unit, Front panel, control cable
: 50/20/5 W
: F1D, F2D, F3E : Variable Reactance Modulation
F7W : 4FSK (C4FM)
: At least 60 dB below
: About 2 kΩ
169