Yaesu FTM-100DR Operating Manual page 101

5
To add letters to the message, input letters following steps 4 through 5 of "Creating
and sending a new message" on page 99.
● Registering routine messages
You can register up 10 routine messages using a maximum of 80 characters.
Messages you registered can be selected and used in the same way as the 43 prepared
routine messages.
1
Follow steps 1 to 5 in "Creating and sending a new message" on page 99 to input
a text message.
Tip Alphanumeric characters including symbols can be used.
2
Press
3
Press (
Displays the routine message field at the top of the
screen.
4
Rotate the DIAL to select the number where you
want to register the message, then press
Tip You can select a number from "01" to "10".
Registers the text as a routine message and closes
the routine message field.
Tips • If you register a new message to a number where a
message already have registered, the old message
is overwritten.
• To cancel registration, press
appears on the upper side).
appears on the upper side).
again (
Exchanging messages or images
.
101