New Two-Tone CTCSS Pager Function
When using FTM-200DR/DE transceivers with a group of friends, setting the Two-Tone
CTCSS personal codes allows calling just the specific stations. Even when the person
who is called is not near the transceiver, the information on the LCD indicates that a call
was received.
The new two-tone CTCSS pager feature does not operate in digital mode. Press the [D X]
key to change from Digital to Analog FM or the AMS function.
Using the Pager Function
1. Press the [F
MENU
2. Rotate the DIAL knob to select [PAGER] then press the DIAL knob.
3. Press any key (except Power Switch) or PTT switch to finish the setting and return to
the original screen.
Setting the Code for this Station
Set the "pager code" to be called by other stations.
1. Activate the pager function (refer to "Using the pager function" above).
2. Press and hold the [F
3. Rotate the DIAL knob to select [RX CODE 1] then
press the DIAL knob.
4. Rotate the DIAL knob to select the RX CODE 1 of the
code from 01 to 50.
5. Press the DIAL knob or the [SQL
6. Rotate the DIAL knob to select [RX CODE 2] then
press the DIAL knob.
7. Rotate the DIAL knob to select the RX CODE 2 of the
code from 01 to 50.
The same code cannot be used for RX CODE 1 and
RX CODE 2.
Next, set the pager code for directing a call to a specific partner station.
8. Rotate the DIAL knob to select [TX CODE 1] then press
the DIAL knob.
] key [SQL] Press the DIAL knob
] key [45 PAGER CODE] Press the DIAL knob
MENU
BACK
] key.
12
SIGNALING
45 PAGER CODE
RX CODE 1
05
RX CODE 2
47
TX CODE 1
05
TX CODE 2
47
SIGNALING
45 PAGER CODE
RX CODE 1
05
RX CODE 2
47
TX CODE 1
05
TX CODE 2
47
SIGNALING
45 PAGER CODE
RX CODE 1
05
RX CODE 2
47
TX CODE 1
05
TX CODE 2
47