Receiver Bluetooth Tips; No Communication Between Transmitter And Receiver - Dexcom G5 mobile User Manual

Step What you see
8

5.8 Receiver Bluetooth Tips

Your transmitter and receiver begin communicating once you start a sensor session. After
approximately 30 minutes, if the Bluetooth symbol is solid, and not blinking, your transmitter
and receiver are talking to each other.
• If blinking, Bluetooth is looking for your transmitter
○ Make sure your transmitter and receiver are within six meters of each other
If the Bluetooth icon is not on the receiver and the Signal Loss icon appears in the receiver's
upper right corner of the status bar, they are not communicating.
No Communication Between Transmitter and
Receiver
Step What you see
1
Dexcom G5 Mobile System User Guide
Starting a Sensor Session
(Continued from previous page)
What you do
Sensor warmup is complete.
You are ready to calibrate!
What you do
Check correct transmitter SN is in receiver.
• SN is on the label on bottom of transmitter box
Press Select to go to Main Menu .
(Continued on next page)
69