Removing Applicator Barrel And Collar - Dexcom G5 mobile User Manual

Inserting Sensor Wire
9

Removing Applicator Barrel and Collar

10
11
Dexcom G5 Mobile System User Guide
Starting a Sensor Session
(Continued from previous page)
Place two fingers directly above collar to steady
applicator barrel.
Place thumb on the white plunger .
Push plunger completely down the applicator barrel.
You should hear 2 clicks.
NOTE: Finger placement is important for correct
insertion.
Move two fingers from above collar to below collar.
Keeping your thumb as a base on the white plunger.
Pull collar all the way back towards your thumb.
You should hear 2 clicks.
NOTE: Finger placement is important for correct
needle removal.
Hold transmitter latch down against your body.
Squeeze ribbed release tabs on the sides of sensor
pod.
(Continued on next page)
61