Changing Receiver Alarm And Alerts; Profiles - Dexcom G5 mobile User Manual

Any changes to the app will not carry over to the receiver. If using both, make the same
changes in the receiver you made in your smart device. If you do not, you may miss an Alarm
or Alert.

11.3 Changing Receiver Alarm and Alerts

You will notice a flow difference between the app and the receiver when personalizing your
Alarm/Alerts. With the app, all Alert adjustments are made from one screen, whereas in the
receiver, you make changes in different screens.
Unlike the app, you change your receiver's tones (known as Profiles) through a number of
different screens in the Profiles menu.

Profiles

Profiles determine the sound and volume of your Alarm and Alerts.
As mentioned in the previous chapter, the receiver uses a series of beeps/vibrations for an
Alarm or Alert. The receiver does not have the same variety of tones as the app; however you
can adjust their volume. While the receiver does not have a silent mode, selecting Vibrate will
replace audible beeps with quiet vibrations. The only exception is the Alarm: the urgent low
Alarm cannot be turned off.
Changes made in Profiles are applied to all of the receiver's Alarm/Alerts. If you choose Soft
(see next table), all Alerts are in Soft mode. In Chapter 10, you learned how many beeps each
Alarm/Alert has.
Normal is the default setting for your receiver sound Profiles.
Attentive uses a rising or falling melody instead of beeps.
The receiver first vibrates when sending you an Alarm or Alert. If you clear the alert at the
first vibration by pressing the Select button on your navigation wheel, you will not get any
Alarm/Alert tones. If you would like to continue to get your Alarm or Alert after clearing, later
in this chapter you will learn about setting up Repeat Alerts.
HypoRepeat is very similar to the Normal Profile, but keeps repeating the fixed low alarm
every 5 seconds until your sensor glucose value rises above 3.1 mmol/L or you confirm by
pressing the Select button.
The next table lists the different sound Profiles, starting with the quietest, working its way up
to the loudest.
Dexcom G5 Mobile System User Guide
On the Go With G5: Customizing Your Alarm and Alerts 181