Dexcom G5 mobile User Manual page 99

Device
Session Stopped
Smart Device:
Lock Screen
Smart Device:
In App
Receiver
Sound/Vibration Prompts
In case you cannot look at your screen, both the smart device and receiver provide
beep/vibration prompts to remind you your sensor session will end in 30 minutes, it has just
ended, or if your sensor failed and you need to start a new session. Remember, if your smart
device is turned on to Silent or Do Not Disturb, you will not get any sound prompts.
For more information on setting your sound/vibration prompts, please see Chapter 9.
Smart Device
Your smart device prompts you with a triple beep. If not cleared, you receive the triple beep
twice, five minutes apart.
Receiver
The receiver alerts you with an initial vibration prompts. If not cleared, you receive a
vibrate/beep twice, five minutes apart.
Once a sensor session has expired, you are ready to start your new session! If you are not
sure what to do, the app will provide instructions, or you can refer to the Quick Start Guide,
tutorials, or go to Chapter 5 in this User Guide.
Dexcom G5 Mobile System User Guide
Ending Your Sensor Session and Transmitter Session
(Continued from previous page)
What you see
N/A
What it means
Sensor session has stopped.
App
• No sensor glucose readings
• Prompts for new session
Receiver
• Straight line
○ No sensor glucose readings
97