Receiver Electromagnetic Immunity Specifications - Dexcom G5 mobile User Manual

Medium Priority Alarm
Audible Output
Moisture Protection
Limited Warranty
Control Classification
The warranty life of the receiver is 1 year. The service life for the accessories is noted to be up to
one year. If you have difficulty reading your receiver in bright sunlight, you may need to seek a shady
location. Do not connect the receiver to any equipment not specified in IFU.
Guidance and Manufacturer's Declaration –
Electromagnetic Immunity
The receiver (MT22719) is intended for use in the electromagnetic environment specified in the next
table. The customer or the user of the receiver should ensure that it is used in such an environment.

Receiver Electromagnetic Immunity Specifications

Immunity Test
Electrostatic
Discharge (ESD)
IEC 61000-4-2
Electrical Fast
Transient/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Dexcom G5 Mobile System User Guide
Technical Information
(Continued from previous page)
Protection against insertion of large objects and dripping water
IEC 60601 Test
Level
± 8 kV Contact
± 15 kV Air
± 2 kV for power
supply lines
± 1 kV for
input/output lines
± 1 kV line(s) to line(s)
± 2 kV line(s) to earth
(Continued on next page)
50 dBa at 1 meter
IP22: Vertically falling drops
1 year
Class II equipment
Transmitter
Compliance
Level
± 8 kV Contact
± 15 kV Air
± 2 kV for power
supply lines
Not applicable
± 1 kV line(s) to line(s)
Not applicable
Electromagnetic
Environment Guidance
Floors should be wood, concrete or
ceramic tile. If floors are covered
with synthetic material, the relative
humidity should be at least 30%.
Mains power quality should be that
of a typical commercial or hospital
environment.
Mains power quality should be that
of a typical commercial or hospital
environment.
233