Figure 70: Positioning The Sfp Handle In The Upright Position; Figure 71: Connecting A Fiber Optic Cable To An Sfp Transceiver - Allied Telesis AT-x510-28GTX Installation Manual

Figure 70. Positioning the SFP Handle in the Upright Position
7. Connect the fiber optic cable to the transceiver, as shown in Figure 71.
The connector on the cable should fit snugly into the port, and the tab
should lock the connector into place.
Figure 71. Connecting a Fiber Optic Cable to an SFP Transceiver
8. Repeat this procedure to install additional transceivers.
x510 Series Installation Guide for Stand-alone Switches
SFP Handle
119