Allied Telesis AT-x510-28GTX Installation Manual page 63

x510 Series Installation Guide for Virtual Chassis Stacks
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord. E3

Warning
Class I Equipment. This equipment must be earthed. The power
plug must be connected to a properly wired earth ground socket
outlet. An improperly wired socket outlet could place hazardous
voltages on accessible metal parts. E4

Note
Only one grounding post on the DC powered AT-x510-28GSX-80
Switch should be connected to the building protective earth. The
second grounding post should not be used. Allied Telesis
recommends using the grounding post for power supply 1 (PSU 1).
Note
Pluggable Equipment. The socket outlet shall be installed near the
equipment and shall be easily accessible. E5

Caution
Air vents must not be blocked and must have free access to the
room ambient air for cooling. E6

Warning
Operating Temperatures. All the switches are designed for a
maximum ambient temperature of 45° degrees C. E52

Note
All Countries: Install product in accordance with local and National
Electrical Codes. E8

Warning
Only trained and qualified personnel are allowed to install or replace
this equipment. E14

63