Figure 75: Positioning The Sfp Or Sfp+ Handle In The Upright Position; Figure 76: Connecting A Fiber Optic Cable To An Sfp Or Sfp+ Transceiver - Allied Telesis AT-x510-28GTX Installation Manual

Chapter 8: Cabling the Networking Ports
122
Figure 75. Positioning the SFP or SFP+ Handle in the Upright Position
7. Connect the fiber optic cable to the transceiver, as shown in Figure 76.
The connector on the cable should fit snugly into the port, and the tab
should lock the connector into place.
Figure 76. Connecting a Fiber Optic Cable to an SFP or SFP+ Transceiver
8. Repeat this procedure to install additional transceivers.
SFP Handle