Unpacking The Switch; Figure 22: Components Of The X510 Series Switches - Allied Telesis AT-x510-28GTX Installation Manual

Unpacking the Switch

Figure 22 lists the items that come with the switch. If any item is missing or
damaged, contact your Allied Telesis sales representative for assistance.
One 2 m (6.6 ft) local management cable with
RJ-45 (8P8C) and DB-9 (D-sub 9-pin)
connectors
Two rack mounting brackets
One or two regional AC power cords:
AT-x510L-28GT, AT-x510L-52GP, AT-x510L-52GT,
AT-x510L-52GP: 1 each
AT-x510-28GTX, AT-x510-28GPX, AT-x510-
28GSX, AT-x510-52GTX, AT-x510-52GPX: 2 each
Eight bracket screws
Figure 22. Components of the x510 Series Switches
Note
The DC powered AT-x510-28GSX-80 Switch does not come with
the two AC power cords.
Note
You should retain the original packaging material in the event you
need to return the unit to Allied Telesis.
After checking the contents of the shipping containers, go to Chapter 4,
"Installing the Switches on a Table or in an Equipment Rack" on page 71.
x510 Series Installation Guide for Virtual Chassis Stacks
69