Stacking Transceivers; Figure 16: Stacking Transceivers; Table 10: Stacking Transceivers - Allied Telesis AT-x510-28GTX Installation Manual

Chapter 2: Virtual Chassis Stacking

Stacking Transceivers

52
You connect the switches of the VCStack with the stacking transceivers
listed in Table 10 and shown in Figure 16.
Stacking
Transceiver Model
AT-StackXS/1.0
AT-StackOP/0.3
AT-StackOP/9.0
Figure 16. Stacking Transceivers
With its two SFP+ transceiver-style connectors and one meter of twinax
cable, the AT-StackXS/1.0 transceiver is appropriate in situations where
the x510 Series switches are in the same equipment rack or on the same
table.
The fiber optic transceivers are used to build stacks across large
distances.
Table 10. Stacking Transceivers
Cable Type
Twinax cable
62.5/125 µm multi-
mode fiber optic
cable
50/125 µm multi-
mode fiber optic
cable
9/125 µm single-
mode fiber optic
cable
Operating Distance
1 meter (3.29 feet)
33 meters (108 feet)
300 meters (984 feet)
9 kilometers (5.6
miles)
AT-StackXS/1.0
AT-StackOP/0.3
AT-StackOP/9.0