Model Select - FUTABA T18SZ Instruction Manual

Model select

This function is used to load the settings of the
desired model into the T18SZ's memory.
The settings may be selected from either the
transmitter's built-in memory or a SD card (32MB-
2GB). Remember that up to 30 model memories
are available in the transmitter.
The name of the model stored in the transmitter
and the SD card may be changed. This can be very
useful to tell different models settings apart. Each
model name can be as long as 15 characters, and
the model name always appears in the display
● Select [Model select] at
the linkage menu and
call the setup screen
shown below.
＜ or ＞
● Tap the [Model select]
b u t t o n i n t h e H o m e
screen to call the setup
screen shown below.
●Return to Home or
Linkage menu
Current model is
green.
Model addition
1. Tap the [New] button.
The Model selection function performs model addition, call,
deletion, copy, and model name setting.
screen.
of model data into a second memory within the
transmitter and the SD card. It may be used for
getting a head-start on setting up models with
almost the same settings (only differences need to
be modified, instead of entering the complete model
from scratch). Also, this function may be used to
make a backup copy of a model setup before any
changes are made.
2. Tap [Yes] to add the model. (When you want
The Copy function is used to copy one set
to cancel model addition, tap [No].)
*The added model is displayed in the model list.
*When Model addition, a link with a receiver is required.
＜ Linkage menu ＞
● "Save to"
[Internal]: transmitter
memory
[SD card]: SD card
The date by which the
model was made first.
In case of a model on a
SD card, the file name is
indicated. (The file name
can't be changed.)
69