Model Select; Model Copy; Date Reset - FUTABA 10J Instruction Manual

Model select

① Select the SELECT item and then
s e l e c t t h e m o d e l n u m b e r b y
pressing the + key or ‒ key.
＋ −
or
Selection range：1 ∼ 30
For safety, a double setting system is used. When a change is cancelled after the confirmation message is
displayed, the change is not made when moved to another setting item by Jog key.

Model copy

① Select the COPY item and the select
the model number of the copy
destination by pressing the + key
or ‒ key.
＋ −
or
Selection range：1 ∼ 30
For safety, a double setting system is used. When a change is cancelled after the confirmation message is
displayed, the change is not made when moved to another setting item by Jog key.

Date reset

① Select the REST item and then press the Jog
key for 1 second.
● Confirmation message "sure?" blinks.
For safety, a double setting system is used. When a change is cancelled after the confirmation message
is displayed, the change is not made when moved to another setting item by Jog key.
CAUTION
Only the throttle channel (CH3) initial setting is REV (reverse). Thoroughly
check the Hi and Low directions of the engine or motor used and be careful that
they do not suddenly run at full speed. Even after data reset, CH3 is reversed.
② P r e s s t h e Jog key f o r 1
second.
● Confirmation message
"sure?" blinks.
② P r e s s t h e Jog key f o r 1
second.
● Confirmation message
"sure?" blinks.
② Date reset by pressing the Jog key.
（1 second）
③ Select the model by pressing the
Jog key.
（1 second）
● A c o n f i r m a t i o n " b e e p
beep" sounds to show that
selection is complete.
③ Copy the model by pressing the
Jog key.
（1 second）
● A c o n f i r m a t i o n " b e e p "
sounds and "COMPLETE"
is displayed on the screen
t o s h o w t h a t c o p y i n g i s
complete.
● A c o n f i r m a t i o n " b e e p " s o u n d s a n d
"COMPLETE" is displayed on the screen is
complete.
41