Function Name - FUTABA T18SZ Instruction Manual

Function name

The name of the spare functions (Auxiliary 1-8)
can be changed for the full name (10 characters) or
for the abbreviated name (4 characters).
● Tap the [Function name] button in the Linkage
menu to call the setup screen shown below.
●Return to Linkage menu
Function name change method
1. Select [Function name] of the Linkage menu
and tap the screen.
2. The Function name setup screen is displayed.
3. When the function whose name is be
change is selected and the screen is tapped,
a modification screen is displayed.
4. Select the function to be renamed and
select [Rename] and tap the screen. A
character input screen is displayed. Input the
function name.
5. When [Reset] is selected and the screen is
held down, the function name is set to the
initial state function name.
90
＜ Linkage menu ＞
Function name can be changed
6. The function name may be displayed in 10
characters or 4 characters, depending on
the setup screen. For 4 characters, display,
input the function name as required.