Connector/Plug - FUTABA T18SZ Instruction Manual

Connector/Plug

Trainer
Connector
Connector for trainer function
When you use the trainer function, connect the
optional trainer cable between the transmitters for
teacher and student.
*You can set the trainer function on the Trainer Function
screen in the System menu.
32
＜ Before Use ＞
Earphone
Plug
Charge
Plug
Rubber cover
S.BUS (S.I/F)
Connector
S.BUS connector (S.I/F)
When setting an S.BUS servo and telemetry
sensor, connect them both here.
Earphone plug
Connecting a stereo headphone to this plug, the
speech information of telemetry can be heard.
Connector for battery charger
This is the connector for charging the LiFe
battery FT2F2100BV2 that is installed in the
transmitter. Do not use any other chargers except
the attached special charger corresponding to LiFe
battery.
WARNING
Do not connect any other chargers
except the special charger to this
charging connector.
*If you take out the LiFe battery FT2F2100BV2 from
the transmitter, you can use the optional balance
charger LBC-4E5 corresponding to LiFe battery.