FUTABA T18SZ Instruction Manual page 126

18-channel digital proportional r/c system
Hide thumbs Also See for T18SZ:
Table of Contents

Advertisement

Camber mixing
This mix adjusts the camber and corrects the
elevators. [Airplane/glider, 2 ailerons or more]
Airbrake→ ELE
This mix is used to correct operation of the airbrakes
(spoilers) when landing. [Airplane/glider, general]
Camb. FLP→ELE
This mix is used to correct for attitude changes when
the camber flaps are being used. [Airplane/glider, 2
ailerons + 1 flap or more]
Rudder→Aileron
This function is used to correct roll knife edge, etc.
of stunt planes. [Airplane/glider, general]
Rudder→Elevator
This function is used to correct roll maneuvers, knife
edge, etc. of stunt planes. [Airplane, general]
Butterfly (Crow)
This function is used when powerful brake operation
is necessary. [Glider, 2 ailerons or more]
Trim mix 1/2
The ailerons, elevators, and flaps trim offset rate
can be called by switch or condition selection. [Glider
general]
Snap roll
This function selects the snap roll switch and adjusts
the steering angle of each rudder. Servo speed can also
be adjusted. [Airplane general]
RUDDER 1
(
Winglet
at Flying wing
(Chip Aileron)
(RUDDER 2)
126
< Model menu (Airplane/Glider/Multicopter Functions) >
AIL1
FLP 3
(Main Aileron)
(Brake Flap)
)
AIL 3
FLP 1
(Camber Flap)
V-TAIL
ELEVATOR
RUDDER
(ELEVATOR 2)
Air brake
This function is used when airbrakes are necessary
when landing or when diving, etc. during flight.
[Airplane, general]
Gyro
This is a dedicated mix when a GYA Series gyro is
used. [Airplane/glider/multicopter, general]
Ailevator
This function adjusts the elevators and ailerons of
models with elevator specifications. [Airplane/glider,
elevator specifications]
Acceleration
Allows a brief "overload" in response to sudden
Elevator, Ele→Camber, and Ail→Rudder. [Glider
general]
Motor
The operation speed when the motor of F5B
and other EP gliders is started by switch can be set.
[Airplane/glider, general]
V-Tail
This function adjusts the elevators and rudder of
V-tail models. [Airplane/glider, V-tail specifications]
Winglet
This function adjusts the left and right rudders of
winglet models. [Airplane/glider, winglet specifications]
AIR BRAKE
FLP 4
AIL 2
(Brake Flap)
(Main Aileron)
FLP 2
(Camber Flap)
(Chip Aileron)
AILVATOR
ELEVATOR
ELEVATOR 2
(AILERON 5)
(AILERON 6)
RUDDER 2
(
)
Winglet
at Flying wing
AIL 4

Advertisement

Table of Contents
loading

Table of Contents