Ail → Brake Flap - FUTABA T18SZ Instruction Manual

Ail → Brake flap
This mix operates the brake flaps (FLP3/4)
in the aileron mode. When the aileron stick
is manipulated, the aileron and brake flaps
perform the aileron operation simultaneously
and the operation characteristic of the roll axis is
improved.
● The aileron left and right mixing rates can be
adjusted for each flap servo.
● A mixing curve can be set.
● Mixing during flight can be turned ON/OFF by
setting a switch. (Always ON at [--] setting)
● Linking can be set: Link this mix to other mixes.
● Select [Ail→ Brake flap] at the model menu
and call the setup screen shown below.
●Return to Model menu
● Mixing curve setting
(For a description of the
setting method, see the
description at the back
of this manual.)
Activate the function by
tapping the [INH] .
Condition group/single
mode selection (Gr. /Sngl)
The ON/OFF switch of
mixing is chosen.
To set linking, tap to
the [OFF] item
●Setting method
● Tap to the INH item .
(ON is displayed.)
● When setting a switch, tap to the [--] item
of the switch and tap the screen to call the
selection screen, and then select the switch
and set its ON direction. (Always ON at "--"
setting)
(For a description of the switch selection
method, see the description at the back of
this manual.)
● Tap to the left or right button of each flap
servo .
Adjust the mixing rate.
130
＜ Model menu (Airplane/Glider/Multicopter Functions) ＞
[Corresponding model type]: Airplane/
glider, 4 flaps or more
(Chip Aileron)
Currently selected condition name
*When the mixing direction is reversed by the linkage,
adjustments can be made by reversing the mixing rate
polarity (+ or -).
● A mixing curve can be set.
(For a description of the curve setting
method, see the description at the back of
this manual.)
● To set linking, tap to the Link item .
Set it to ON and tap the screen.
FLP 4
FLP 3
(Brake Flap)
(Brake Flap)
AIL1
(Main Aileron)
AIL 3
Left/right overall
adjustment at Rate A
and Rate B
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)
Adjustment of each
flap servo