FUTABA T18SZ Instruction Manual page 174

Operation modes
The operation modes when stick, trim lever, or
knob was selected are described below.
Linear mode
This mode sets ON/OFF at the left or right (up or
down) with the set point as the reference.
Symmetrical mode
Left and right (up and down) operations are
symmetrical about the neutral position. For
instance, when you want to switch DR1 with the
aileron stick, when the stick is moved to the left or
right, DR1 can be turned on at the same left and
right position.
174
＜ Data ＞
Shifting the ON/OFF point
The ON/OFF point can be shifted. ON/OFF
at a free position can be changed.
●Green range: OFF range
●Red range: ON range
[Setting method]
1. Move the stick, etc. to the point you
want to shift and tap the [Set] button. The
boundary points change.