Telemetry:servo Sensor [Temperature, Angle] - FUTABA T18SZ Instruction Manual

Telemetry : Servo sensor [Temperature] [Angle]
● Select [Servo sensor] in the Telemetry
screen and access the setup screen shown
below.
●Return to
Linkage menu
↑ An upward arrow
indicates the alarm
will sound when the
temperature reaches
above your set value.
↓ A downward arrow
indicates the alarm
will sound when the
temperature reaches
below your set value.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
The ON/OFF switch
of Speech is chosen.
↑ An upward arrow
indicates the alarm
will sound when the
angle reaches above
your set value.
↓ A downward arrow
indicates the alarm
will sound when the
angle reaches below
your set value.
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
The ON/OFF switch
of Speech is chosen.
110
＜ Linkage menu ＞
*Servo sensor must be installed in the aircraft.
● Temperature
Vibrator is chosen from
type1-3, and Inhibit.
● Angle
Vibrator is chosen from
type1-3, and Inhibit.
A setup of the
temperature on which
the alarm operates.
Initial value: ↑ 115℃↓ -10℃
Adjustment range -10℃ ~115℃
( ↑ Limit ≧ ↓ Limit)
A setup of the angle
on which the alarm
operates.
Initial value: ↑ +180.0° ↓ -180.0°
Adjustment range -180.0° ~ +180.0°
( ↑ Limit ≧ ↓ Limit)