Broil Element, Bake Element - Thermador CM301B Service Manual

Lit. No. 94-30-006B
BROIL ELEMENT
Terminals
Refer to Page 30 to access the broil element. To
test the element, perform the following steps.
1. Turn off the electrical power to the oven.
2. Set the ohmmeter to the R x 1 scale.
3. Disconnect one of the wires from the broil
element.
4. Touch the test leads to the broil element
terminals. The meter should indicate be-
tween 13 Ω and 20 Ω.
BAKE ELEMENT
Refer to Page 38 to access the bake element. To
test the element, perform the following steps.
1. Turn off the electrical power to the oven.
2. Set the ohmmeter to the R x 1 scale.
3. Disconnect one of the wires from the bake
element.
4. Touch the test leads to the bake element
terminals. The meter should indicate be-
tween 20 Ω and 30 Ω.
Page 57
CM Oven Service Manual
Terminals