Removing Oven Thermal Sensor - Thermador CM301B Service Manual

CM Oven Service Manual
REMOVING THE OVEN THERMAL SENSOR
WARNING
Turn off the electrical power going to the
oven before servicing.
CAUTION
When you work on the oven, be careful
when handling the sheet metal parts. There
are sharp edges present and you can cut
yourself if you are not careful.
1. Turn off the electrical power going to the
oven.
2. Open the microwave oven door.
3. Remove the oven racks.
4. Remove the two screws from the oven
thermal sensor.
Thermal Sensor Screws
5. Pull the oven thermal sensor forward un-
til the wire splices are inside the oven.
6. Using the instructions in the "Thermal
Sensor Kit," (#35-00-306), splice the wires
from the new oven thermal sensor to the
main wires. Cut the wires from the old
sensor at the location shown above.
Page 40
Lit. No. 94-30-006B
Cut Wires
Here
Wire
Splices
Oven
Thermal
Sensor