Lit. No. 94-30-006B
REMOVING THE UPPER (OR SINGLE) OVEN DOOR
HANDLE & OUTER GLASS ASSEMBLY
CAUTION
When you work on the oven, be careful
when handling the sheet metal parts. There
are sharp edges present and you can cut
yourself if you are not careful.
1.
Remove the upper (or single) oven door
from the unit (see Page 42) and lay it on a
padded surface with the glass side down
and the bottom edge facing you.
2.
Remove the two bottom edge screws and
the two top screws from the liner. This will
separate the glass and liner sections of the
door.
Top Screws
Door Liner
3.
Lift the door liner assembly off the door
glass assembly and set the liner aside.
4.
To remove the oven door handle, remove
the hex-head screws (see the small inset)
from the left and right handle brackets and
remove the brackets and handle from the
glass.
Handle Brackets
5.
Bottom Screws
6.
After reinstalling the oven door, check
around the door for microwave radiation
leakage.
Page 45
CM Oven Service Manual
To remove the outer oven door glass:
a) Remove the four screws from the left
and right glass support brackets and
remove the brackets.
Top Screws
Glass Support
Brackets
Bottom Screws
b) Rotate the top door trim w/end caps
back and remove it from the top of the
door.
Door Trim With End Caps
If not already done, remove the handle
from the outer door glass (see Step 4).
Service
Alert!!