Glass Touch Panel - Thermador CM301B Service Manual

Lit. No. 94-30-006B
The glass touch panel is comprised of a piece of curved glass with 2
control boards glued onto it.
Left side touch control board:
The large touch control board is glued on the left side of the curved
glass. The large touch control board controls the following 12 modes;
This control board has 3 pin headers and are identified as P1, P2, P3.
P1 pin header has 21pins (only 20 are used, #2 is missing) and connects
to the display head using 3 harnesses. One harness has 10 wires, one
harness has 8 wires and one harness to 2 wires.
P2 pin header has 8 pins (only 7 are used, #2 is missing) and connects
to the small right side touch control board.
P3 pin header on the large left side touch control board is not used.
Right side touch control board:
The small touch control board is glued on the right side of the curved
glass and controls the following 7 modes;
This control board has 1 pin header and is identified as P2.
P2 pin header has 8 pins (only 7 are used, #2 is missing), and connects
to the large left side control board.

Glass touch panel

MICROWAVE PROBE CONVECTION
COOKSMART SELF CLEAN BROIL
1-2-3-4
PAUSE PROOF STOP
RESUME DEHYDRATE TIME
1 2 3
LIGHT PANEL LOCK
4 5 6
TIMER 1 TIMER OFF
7 8 9
CS+ -
1 BREAD, DESSERT
START 0
CS+2 -
LARGE ROAST/POULTRY
Page 81
BAKE UPPER
LOWER
ROAST UPPER
OFF
COOK LOWER
TIME OFF
CLOCK
TIMER 2
CS+3 -
SMALL ROAST/POULTRY
CS+4 -
VEGETABLES
CM Oven Service Manual