Removing Stirrer Motor - Thermador CM301B Service Manual

CM Oven Service Manual
REMOVING THE STIRRER MOTOR
WARNING
Turn off the electrical power going to the
oven before servicing.
CAUTION
When you work on the oven, be careful
when handling the sheet metal parts. There
are sharp edges present and you can cut
yourself if you are not careful.
1. Turn off the electrical power going to the
oven.
2. Pull the oven out of its mounting location
so that you can access the trim and ple-
num covers.
3. Remove the trim and top plenum covers
from the oven (see Page 10).
4. Disconnect the stirrer motor wires from
the terminal block and the in-line connec-
tor.
Stirrer Motor Wires
In-line Connector Terminal Block
5. Remove the two mounting screws from
the stirrer motor bracket, lift the motor,
and slide the coupling out of the stirrer
blade receptacle.
Page 14
Lit. No. 94-30-006B
Screw
Stirrer Motor
Screw
Motor
Coupling
Stirrer
Blade
Receptacle