Thermador CM301B Service Manual page 23

Lit. No. 94-30-006B
8. Remove the four mounting screws from
the high voltage microwave transformer
and remove the transformer from the
oven.
Screw (1 of 4)
9. Remove the heat sink plate from the top
of the high voltage microwave trans-
former.
10. Apply a liberal amount of heat sink paste
over the top of the new transformer, then
place the heat sink plate in the center of
the transformer and press it down so it
adheres firmly.
Heat Sink Paste
Page 21
CM Oven Service Manual
Heat Sink Plate