Thermador CM301B Service Manual page 35

Lit. No. 94-30-006B
10. Lift the back of the stirrer motor platform
just high enough to remove the wave-
guide from underneath it.
Raise Stirrer Motor Platform
11. Clear any insulation away from the area
Lift Waveguide
Page 33
that the waveguide will be mounted in so
that the screw holes will align properly
when the waveguide is installed.
Clear Insulation From This Area
IMPORTANT: Make sure that you reinstall
the magnetron as instructed on Page 23.
CM Oven Service Manual
Tech Tip!!