Removing Oven Module - Thermador CM301B Service Manual

CM Oven Service Manual
REMOVING THE OVEN MODULE
WARNING
Turn off the electrical power circuit to the
oven at the main junction box before ser-
vicing this unit.
CAUTION
When you work on the oven, be careful
when handling the sheet metal parts. There
are sharp edges present and you can cut
yourself if you are not careful.
Broil Element
Left Rack Support
Hidden Element
Enclosure
(30") Convection Kit—#35-00-687
Catalyst
Reflector
Halogen Lamp
Convection Rack
Hidden Element
Cover
Hidden Bake
Element
Meat Probe
Receptacle Cover
1. Turn off the electrical power to the oven.
2. To make servicing easier, remove the oven
door (see Page 99).
3. Remove the oven from the wall.
4. Remove the components from the oven,
shown in illustration, below. Refer to the
sections in this manual for the procedures
on removing the components.
5. With all of the oven components removed,
remove the six screws (three on each side)
from the front sides of the oven can.
6. Pull the oven can forward and remove it.
Thermal
Sensor
Convection Motor
Assembly
Convection Baffle
Right Rack Support
Meat Probe
Receptacle
Meat Probe
Hole Plug
Page 102
Lit. No. 94-30-006B
Convection Mtg.
Bracket Cover
Convection Element
Oven Can Screws
(3 on each side)
Counter Support
Bracket (L & R)
Counter Support
Hinge
Oven Module Kit