Removing Light Transformer; Double Line Break Relay - Thermador CM301B Service Manual

Lit. No. 94-30-006B
REMOVING THE LIGHT TRANSFORMER
WARNING
Turn off the electrical power going to the
oven before servicing.
CAUTION
When you work on the oven, be careful
when handling the sheet metal parts. There
are sharp edges present and you can cut
yourself if you are not careful.
1. Turn off the electrical power going to the
oven.
2. Pull the oven out of its mounting location
so that you can access the trim and ple-
num covers.
3. Remove the trim and top plenum covers
from the oven (see Page 10).
4.
To remove the light transformer:
a) Disconnect the wires from the termi-
nals.
b) Remove the two mounting screws from
the bracket.
Screw
Light
Transformer
& DOUBLE LINE BREAK RELAY
Screw
YL-82
WH-19
5. To remove the upper (or single) oven

double line break relay:

a) Disconnect the wires from the relay ter-
minals.
b) Remove the two screws.
Double Line
Break
Screw
Relay
Page 13
CM Oven Service Manual
YL-83
YL-141
YL-84
YL-85
RD-81
YL-18
Screw
YL-20
BK YL
BU-21
YL
34 10
OR-22
09