Thermador CM301B Service Manual page 37

Lit. No. 94-30-006B
6. To remove the convection motor:
a) Remove the nut from the convection
fan blade and remove the blade and flat
washer from the motor shaft.
b) CAUTION: The rear shield cover plate
is sealed and tested for microwave
emissions at the factory. DO NOT RE-
MOVE THIS SHIELD COVER.
Rear Shield Cover Plate Screw (1 of 32)
Rear Shield
Cover Plate
Spacer (1 of 4)
Nut Convection Fan Blade
Bottom Motor Mtg. Screw
Rear Shield Cover
c) Remove the 15 motor mounting screws
from the rear shield cover plate and
remove the plate.
d) Motor and bracket assembly can now
be removed from the back of the oven.
Continued on the next page.
Page 35
CM Oven Service Manual
Plate
Screw (1 of 15)