Removing Magnetron Fan Assembly - Thermador CM301B Service Manual

CM Oven Service Manual
REMOVING THE MAGNETRON FAN ASSEMBLY
WARNING
Turn off the electrical power going to the
oven before servicing.
CAUTION
When you work on the oven, be careful
when handling the sheet metal parts. There
are sharp edges present and you can cut
yourself if you are not careful.
1. Turn off the electrical power going to the
oven.
2. Pull the oven out of its mounting location
so that you can access the trim and ple-
num covers.
3. Remove the trim and top plenum covers
from the oven (see Page 10).
4. Disconnect the wires from the terminals
of the magnetron fan assembly.
5. Remove the two fan assembly bracket
screws from the plenum and remove the
assembly.
6. Remove the two duct screws and slide it
off the fan assembly.
WH-24
WH-162
Bracket
Screws
Page 16
Lit. No. 94-30-006B
2 Duct
BU-23
Screws
WH-94
DUCT
Magnetron Fan
Assembly