Replacing The Direction Indicator Lamp; Rear Light Without Lamp Cover - Otto Bock B400 Instructions For Use Manual

Accessories
To change the lamp of the front direction indicator, proceed
as follows:
n Open the front direction indicator: Insert a small screw-
driver into the recess of the direction indicator housing
and flip down the pane of the direction indicator (see fig.
21, item 2).
n Remove the pane.
n Slightly rotate the lamp to release it from the lock on the
lamp socket and pull it out (see fig. 22).
Fig. 22

Replacing the direction indicator lamp

Page 110
To change the rear direction indicators and the rear light,
proceed as follows (see fig. 23):
n Unscrew the pane.
n The rear lamps are attached on the right and left side on
sprung-mountings. Exert slight pressure to the right and
pull the lamp forward on the left side.
n To protect the front lamps against damage, they are pro-
vided with rubber bearings.
Fig. 23

Rear light without lamp cover

05 / 2009 B400