Side Panel With Armrest; Fig. 6 Release Strap For The Backrest; Fig. 7 Removing The Side Panel - Otto Bock B400 Instructions For Use Manual

Operation
Fig. 6 Release strap for the backrest

6.1.2 Side Panel with Armrest

The side panels can be removed by loosening the thumb
screws and lifting the side panels. If the control panel is at-
tached to the armrest, the side panel must be removed to-
gether with the control panel and carefully deposited on the
ground or on the wheelchair seat.
The thumb screws are located at the lower end of the arm-
rest holders (see arrow, fig. 7).
Page 90
Fig. 7 Removing the side panel
After remounting the side panel, do not forget to firmly
retighten the thumb screw.
The height of the armrest can be changed by loosening and
shifting the screw (see fig. 8).
Firmly re-tighten the screws after making adjustments.
The side panels must be inserted into the armrest
INFORMATION
holder up to the height of the lowest receiver tube's bore
hole at least.
05 / 2009 B400