Table of Contents
Advertisement
38
6
Service Functions
6.7
Save Log files
Access only with storage device defined as Default storage !
The function Save log files saves a file with the name export.log on the storage device. That file contains the
printer settings and the executed processes since the last startup. The function supports the firmware programmer in
localizing errors.
1. If the log file should be saved to an USB flash drive, select USB Memory as Default Storage and insert USB
flash drive into a USB master interface.
If the log file should be saved on the Internal Flash File System, select IFFS as Default Storage.
2. Start Offline menu.
3. Select Service.
If the menu is protected via a PIN a prompt appears in the display. Enter the code number and confirm with OK.
4. Select Save log files.
The file export.log will be saved in the root of the storage device.
5. Confirm with
The printer returns to the Service menu.
6.8
Printer Model
Access only with service key inserted!
The device designation can be changed with the Printer model function.
1. Start Offline menu.
2. Select Service > Printer model.
3. Select the desired model.
The printer returns to the Service menu.
Following all test printout, the short status and the web interface show the chosen printer model.
.
38
Hide quick links:
Advertisement
Table of Contents
