14
Storage Devices
58
14.5.2
Print File List
The Print file list function creates a list of the files stored on the default storage device.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Start menu.
Select Storage > Print file list
The display shows the selection of storage devices
Select a storage device and confirm with
The directory of the storage device will be printed.
Contents of the printout:
•
the name of the storage device
information on the saved files
•
•
the size of the available memory area
14.5.3
Copy Files
With the Copy files function files can be copied from one to another storage devices.
Insert the storage devices.
Start menu.
Select Storage > Copy files.
Under the headline Source the selection of storage devices will be shown.
Select source device.
Select a folder.
Select files. One single file or all files (*.*) of the folder can be selected.
Confirm the selection with
Under the headline Destination the selection of storage devices will be shown again.
Select destination device and folder.
Confirm the selection with
The files are copied. The display shows the message "Copied ... file(s) to [Destination]"
Select Continue to return to the Storage menu.
14.5.4
Format Storage
The Format function can be used to delete all data from a storage device. This reformats the storage device. So you
can also use the Format function if the Unknown card error message appears when using the device.
Insert storage device
Start menu.
Select Storage > Format storage.
If the function is protected via a PIN a prompt appears in the display. Enter the code number and confirm with OK.
The display shows the selection of storage devices.
Select a storage device and confirm the selection with
The display shows the message All data on the selected device will be lost.
Select Continue. The storage device will be formatted.
Do not remove the device from the printer during the deleting procedure.
The printer returns to the Storage menu.
.
.
.
.
58