Advertisement
CARF-Models P-47
www.carf-models.com
If you have not already done so, add servo extensions to the aileron and flap servos. An aileron
extension is easily pulled through the wing using any long slender rod. Use commercially
available servo connector clips or heat shrink tubing to secure the extensions to the servo leads so
that they will not separate in flight!
You should secure all hoses and leads in an orderly fashion so that they cannot interfere with the
mechanical operation of the wing servos or retracts. Take care not to pinch the air hoses. Wires
should be protected where secured and cable ties should be snug, but not overly tight:
64
Advertisement
