Advertisement
CARF-Models P-47
CONSTRUCTION
The CARF-Models P-47 features precut servo pockets and mounting holes with spacing
appropriate for JR digital servos – the 8611A will drop right in.
Larger servo screws are provided and strongly recommended for all servo installations.
Elevator Servo Installation
Locate elevator servo pushrod hardware and install on your elevator servo.
Use of other servos is up to the individual builder and may create
additional challenges.
Note: When applying epoxy other glues to composite surfaces,
ALWAYS lightly sand then thoroughly clean (with lacquer
thinner or alcohol) surfaces that are to be glued. This will create a
superior bond.
Pushrod stiffener
Jam Nut
Threaded Pushrod
Elevator Pushrod Assembly
www.carf-models.com
Ball Link
18
Advertisement
